There are 2 kinds of engraving on minerals, depending on the composition: Laser etching mainly for slates, tiles and bricks. Such materials react with white colour when lazed, which gives a naturally contrasted result. Deep laser engraving: marble, granite, basalt, lava stone, natural stone, pebbles, ceramic, porcelain and black granite It gives a non-contrasted or slightly contrasted result. Often, paint or lacquer is added in the engraving after to get a nice coloured result. Cutting minerals is not possible with a laser.
Engraving Granite or Marble with a text and a sometimes a photo is an ancient Funeral tradition (mainly in Europe and South America countries). Now, engraving on different kinds of stone is very popular in new markets like Jewelry, interior design and crafts, events, gifts and signage.
A low power source is enough, even for a large photo but it will take longer as you need multiple passes.
Integrated laser system to mark and engrave on all metals.
Medium fully automated laser marking station.
Small CO2 laser engraver and cutter for personalisation, signage and creative.
Large laser engraver and cutter that can do everything.
Integrated laser system to mark organic materials.
Medium CO2 or Fiber laser engraving and cutting machine for signage and small series.
Extra large laser engraving and cutting machine for high productivity.
Mechanical machines can process minerals (engrave only), but we recommend it only for expert users, as bur diamonds are required and they can be very expensive. Moreover, the risk of cutter break increases as the granite quality decreases. Granite is popularly used for headstones and other memorials but images of loved ones or logos can only be engraved on granite using laser equipment.
Gravostyle ™is an all-in-one software that allows you to create your composition and run the laser easily. It embeds a material library that will help to select quickly the best setting for your material. However, for users already trained on other software, our lasers can also be perfectly driven by third-party-software (CorelDraw, Adobe Illustrator, etc.) through our LSolution Driver.
Laser engraving on minerals produces a result similar to sandblasting: a surface engraving that gives the impression that the stone has been bleached. If the contrast is not sufficient for your customer or if you want a specific colour, Gravotech offers the popular “Gravolaque” lacquer range: yellow, green, blue, red, white, black, silver, gold and shiny gold are available as standard however your specific colour can also be developed on demand. Gravolaque is suitable for indoor and outdoor applications.
Discover our stone engraving machines.
Engraving photo on minerals can be complex as it depends on the surface state. Generally, the rule of a thumb is to set 300 DPI maximum on the photo resolution to obtain a good result. This resolution can be increased if the surface state is homogeneous and smooth. We recommend to use very dark black marble (or very light white marble) so the contrast is even more beautiful. Gravolaque will always be necessary as marble does not contract naturally when engraved with a laser. 1.5’’ lens is recommended for photo engraving with a thin spot beam.
Minerals are not flammable, therefore stone laser engraving machine has a very limited risk of fire ignition, contrary to Acrylic or Wood processing when they need to be constantly watched.